Laser Welding Positioner

Single shaft head and tail frame positioner

Double axis L-type positioner

Single axis circular horizontal positioner 

Double column and double axis positioner

Double axis positioner

Three axis positioner

After selecting the installation area of the positioner, please install it according to the following points:
1. The positioner needs to be placed in a closed area of the robot.
2. The positioner must be placed in a moisture-proof and dry environment.
3. Before starting, the positioner must be firmly fixed in the designated position. The bolt holes on the positioner base are used to fix the positioner on the ground.
4. The positioner must be placed within the robot's operating range so that the robot arm can smoothly enter the welding gun into the positioner.
5. The installer connects the positioner power line and the robot's coding line to the robot control cabinet;
6. Place the workpiece on the corresponding tooling on the positioner, and operate the robot teaching pendant to test whether the robot and the positioner can cooperate.
7. If the trial run is within the required range, the positioner will be fixed. If it is not there or there are other problems, the workpiece will be removed and the installation personnel will conduct further troubleshooting.