Raycus 30KW Multi-Module Fiber Laser Generator

Now, more and more companies will choose to use 30KW lasers, the main reason is that 30kW lasers can cut iron plates to 50mm bright surface for oxygen cutting, and air cutting can reach 35mm. The oxygen conventional cutting and air cutting speed below 40mm are significantly improved, and the plate thickness is increased.

Under the same conditions, the higher the laser power, the faster the processing speed. As a result, production efficiency will also increase significantly, which is naturally a welcome achievement for its customers.

At present, the core of Raycus 30KW laser can reach 100μm, while most of the lasers of other brands on the market can only reach 150μm. This shows that the laser output of Raycus has stronger penetrating power and better processing effect.

Raycus's 30KW laser can achieve smaller cores mainly rely on three core technologies.

1. Adopt small core high-power single-mode laser unit technology. Using the research accumulation in nonlinear effects, mode degradation, large mode field high absorption gain fiber and other technologies, it can further reduce the core of the fiber while achieving high power unit module output.

2. The use of upgraded high-power transmission component technology ensures the development and manufacture of small-core output fiber optic cables, and is also the key to ensuring that Raycus high-power fiber lasers can achieve small-core output.

3. The mature high-power fiber beam taper technology is used to couple multiple medium-power fiber lasers into one fiber for output, improve the maximum power of the fiber combiner, obtain higher power while reducing thermal effects, and ensure Beam quality is not affected.

Compared with other brands of lasers on the market, the optical cable length of the Raycus laser reaches 30 meters, which is suitable for large-format processing machine tools. In addition, all Raycus laser products have power redundancy, so there is no need to worry about power reduction, which can ensure the normal use of the laser during the warranty period.

Some features of the Raycus 30KW laser make it more practical. The first is the real-time monitoring function. Through the software, the power, temperature, humidity, dew point temperature of the laser and the water flow of the laser and the output cable can be monitored in real time.

The second is the optical cable. Although the power is high, the heat dissipation capacity is better and the service life is longer. It can also monitor water leakage, temperature and high reflectivity, which is more conducive to the processing of high reflectivity materials.

By comparing with the same power laser products of many brands in the industry, Raycus has a relatively higher cost performance.